E-mail: sales_9@dn-furniture.com
Tel: +86-10-57271839
Contact Us

Add: Room 1103, Building B, Shoukai Dongduhui, Chaoyang North Road,
Chaoyang District, Beijing, China
Contact: Jenny Liang
TEL: +86-10-57271839

Fax: 0086-10-65432261

Phone:+8613401197178
E-mail: jenny_liang@dn-furniture.com

Home > News > Content

News

Plastic Chair Process Introduction
Jul 06, 2017

Plastic Chair Process introduction

Plastic chairs because of its easy to use, light and more for large food stalls and other places, but with more people, cleaning questions will become more trouble, in the family life, we probably pay attention to some small furniture clean details, to a certain extent Is to extend the useful life of the furniture, the same chair is not the same way to clean, here we talk about the chair clean precautions.

1, of course, is the first to know the raw materials of the chair, but today's chairs are usually chairs are solid wood and iron-based, stool surface is leather art may be fabric, in the clean time is not the same raw materials, the same.

2, if it is leather art chair, then, in the leather art clever when the best now unobtrusive position to try to see if it is not faded. If there is fading situation, then use water to dilute; special dirty when available temperature of water, let the natural dry. 3, solid wood chair feet, you can directly scrub with a dry cloth, and then play some cleaning agent, do not use too moist cloth cloth, and then exposed to dry, so that will make the internal solid decay of solid wood.

4, usually cloth stool cleaning method is to spray cleaning agent, quietly scrub. Especially dirty, then you can use warm water to clean the cleaning agent. Do not rub any random brush, so the cloth is very simple look very old. Of course, usually large

Home cleaning chair when the simple and clear can be able to, and if it is necessary to clean the time is still to pay attention to clean the way the plastic chair, compared to good finishing, good treatment of the dust can basically be washed with water, of course, cleaners essential The The use of chairs at home, we compare the oil will often be transferred to the chair above, if it is plastic chairs, with the water is not very simple to sort out the oil out, we probably use the cleaning agent to sort it again, and then use the water finishing, This is a good contrast.

About the production process of plastic products:

1, injection molding process is the first need to design a good mold, can shape a complex shape, size and precision of the products with inserts, can be easily produced in batches of size, shape, performance exactly the same product. Injection molding production performance is good, short molding cycle, you can also implement automated or semi-automatic operation, with high production efficiency and technical and economic indicators. Injection molding in the furniture, life appliances in the design of more use, a variety of injection molding of daily life products continue to emerge.

2, blow molding process for the manufacture of plastic hollow products, such as: bottles, crates, fuel tanks, toys and so on. There are also some of them used in the manufacture of furniture parts.

3, casting molding process will be added with curing agent and other additives, liquid resin mixture into the molding die, under certain conditions to gradually cure to become a certain shape of the product. Applicable to large plastic and shrinkable plastic. Such as: plexiglass, nylon, polyurethane and other thermoplastics and phenolic resin, unsaturated polyester, epoxy resin and other thermosetting plastic molding products.

4, pressing molding process for the production of thermosetting plastic products, divided into molding and laminating. Molding is the use of upper and lower molds to suppress the flow of raw materials, chemical reaction and curing molding. The laminate is formed by laminating a sheet-like material impregnated with a resin into a desired thickness and then putting it into a laminator and bonding it to a layered product at a certain temperature and pressure. Laminating is used to produce reinforced plastic sheets, pipes, bars and plywood.